Hey everybody just wanted to post a cool lil setup using a Zephod & Thevider
VKR Granular, WhiteNoise Filtron, and a Ninja Delay. The loop is a lil NIN?ish
sounding so I thought I post it along with how to set it up. The setup will
produce a very cool sounding element to a song, if it has specific presetting
and scripting of the properties.
VKR Setup and Tips: (1): Attack = 10 ms, Decay = 29 ms, Grainspace = 0.0%,
Grainspeed = -168.5%, Grainlength = 44 smp. (2): Script the Grainstart anywhere
between 50%-100%, but change it around with the melody. (3): Always turn note
off after ever note, unless the notes are consecutive, sometimes it sounds real
bad if you don't. (4) You want to keep the all the note octaves between 7-9,
personally, it just sounds crummy if the octaves are lower than 7.
Filtron Setup and Tips (1): Q = 72.8%, Node = Post Filter, Clip Thresh =
5152, Inertia = 1.00 Tick, MultiFilt = 1x, Gain = 100.0% (2): To get the
desired effect between the VKR and the Filtron, change the Cutoff according to
how you want it to effect the VKR, but keep it below 30% or it will make your
Ninja Delay Setup and Tips: (1): Dry thru = 1, 0-Length = 3, 0-Length unit =
tick, 0-Feedback = 7.8%, 0-f. type = lowpass, 0-f. cutoff = 4835Hz, 0-f.
bandwidth = 100 cps, 0-Wet out = 33.6%
Note: You can play around with the values and add some other stuff; these
setting are my suggested ones with this specific sample. To get my lil loop to
work, you need my sample off my website in order for it to work which u can get
here. Just load the wave it into the first sample slot in the Wavetable.
Mike Fischer - P.O.M.F. / TheBandPOMF
Give me your comments, questions, or anything else you would like to say.
PS: PLEASE DO NOT USE THIS IN YOUR MATERIAL WITHOUT
PERMISSION. IF YOU WANT TO INCORPORATE THIS INTO A SONG, PLEASE ASK ME IF YOU
CAN; MOST LIKELY I?ll LET YOU.